Danger of vacuum impregnation equipment

The danger that vacuum impregnating equipment may become is described in detail below.

(1) Rotating cage of mechanical dangerous drum vacuum impregnating equipment: the circumferential parametric energy control door C is extruded and sheared between the door and the frame of the drum vacuum impregnating equipment in the rotary cage or between the movable parts and the fixed parts.

Oblique roller vacuum paint setting:

Vacuum impregnation equipment and fixtures, including extrusion and shearing between buildings and under gravity during maintenance; - radiation of pressure fluids; - subversion of skewed machinery.

The tunnel type finishing is set between the spiral singer and the fixer.

(2) Hot mouth on the periphery of electric dangerous hot dangerous loading door: burn wound after tunnel-type rectification. Set up loading and unloading area: burn.

Steam radiation in tunnel arrangement: scald.

Noise-induced dangerous drum vacuum dipping settings and tunnel finishing settings. Noise from the air duct may be dangerous.

And the dangerous ignition of materials and materials associated with explosive drum vacuum dipping setting: the danger of ignition caused by drying materials, the danger of explosion caused by gas devices, the danger of explosion caused by drying materials containing combustible gases.

Tunnel post-finishing and cabinet vacuum dipping settings: In view of the drying process is not over, some materials exothermic excitation of spontaneous combustion and fire hazard.

(3) Chemical dangerous corrosive chemicals (e.g. hypochlorite) may cause mechanical damage. Chemical substances (e.g. specific dry cleaning solvents) may undergo mechanical horizontal decomposition in gas-fired installations where toxic gases may occur.