Brief introduction of vacuum pressure impregnating equipment

When we use vacuum pressure impregnation equipment, we need to learn to use some of the basic configuration, then the first to include what configuration? The bottom of the manufacturer master for us to introduce.

According to the master of vacuum pressure impregnation equipment manufacturer, the configuration we need to know is:

1. The upper limit of the heating temperature of the dipping tank: when the dipping tank is heated, the temperature reaches the upper limit automatically closed heating.

2. Zero Pressure Setting: This is the system when the immersion tank for each scale of zero pressure, when the immersion tank pressure below this pressure, the system is willing to loosen the lid, exhaust, vacuum control.

3. Storage tank refrigeration temperature upper limit: When the tank automatically refrigerates, the temperature drops to this temperature when the system automatically closed heating. Storage tank refrigeration temperature bottom line: when the tank automatically refrigerates, temperature drops to the set temperature, refrigeration rests, when the temperature rises to the bottom set value, will automatically start the refrigeration system to continue refrigeration.

4. Pressure Limit Pressure Setting: When the pressure reaches the upper limit setting, the system will close the pressure valve to stop pressurizing. Pressure setting: When the pressure of the dipping tank is higher than this pressure, if the pressure is relieved to this pressure, the system will automatically stop pressure relief once, in order to maintain the necessary pressure for the paint.