Bag pressure vacuum curing furnace

Bag pressure vacuum curing furnace body is horizontal. Welding or riveting joints are not allowed to be seen on the outside surface of the furnace when finished product. High temperature resistant paint is used on the surface of the furnace body resistant to organic solvents (such as acetone, ethyl acetate, etc.). The top exhaust system is used to remove the gas in the furnace, and the exhaust outlet is equipped with an external air pipe. The exhaust outlet is H type. The blast can be controlled by a separate switch, and the blast motor can be overheated protection, heater short-circuit protection, power supply phase protection, and issued sound and light alarm. The exhaust air system adopts manual automatic switching function. When it is automatic, it can automatically exhaust air at the end of drying to improve the safety of the equipment. With 2 lighting observation windows, personnel can be opened from inside, external lighting, 24V safety voltage LED lighting. Large area explosion-proof door design ensures the personal safety of operators. The insulation material adopts rock wool, and the sealing material adopts silicone rubber. The system is controlled by SSR power control module, which can ensure the temperature balance, stability and no fluctuation. The actual power consumption in the insulation stage is about 35% of the total power, which greatly reduces the actual heating power and effectively saves your use cost.